Why You Need Spouwmuur Isolatie(Cavity Wall Insulation) ?

If your house is not properly protected, the light will escape from the wall. As the Vitality Sparing Trust showed, about 33% of the heat in the uninsulated house will flow out of the wall.

However, muurisolatie (wall insulation) can prevent this, and it should not be costly. It also saves the dynamic account.

Do I need muurisolatie (wall warming)?
You probably do not need to emphasize the opportunity to live in ultramodern property (wall warming). Work in the 1990s or later, because your muar can be protected. In any case, you need to protect a more mature property – this means that you need to check whether your house has a solid or hollow (hollow wall). Learn more about spouwmuurisolatie from this blog.

Spouwmuur (hollow wall)

Houses that worked after the 1920s can take place (hollow walls). An embedded wall is actually two walls with a hole in the middle – or a hole. If you are not sure, please study the masonry. If these blocks form a normal example, you may have turbidity (hollow wall). You can also define the width of the wall. Wall thickness of more than 260 mm can have a cavity (cavity).

The walls are then used to protect materials such as mineral wool, polystyrene powder or foam. When the work is done, the spaces are filled and therefore should not be identified. The whole process usually takes only a few hours.

You can simply isolate the insulation (cavity wall insulation), because they are currently not filled. If you do not know whether the wall is now isolated (isolated). You can contact the registered installer to evaluate the borescope. This is due to the penetration of a small gap in the outer wall to check whether the hall is isolated (isolated). Then you can contact the administration of your party building to check if they have any data.

Is my property reasonable?
Spouwmuur isolatie (wall insulation) is not suitable for every object. The width of the hall should be at least 50 mm, and the installer should be able to perform all external muuras. If your house is limited to another property, the installer will introduce a hollow (hollow) barrier so that your neighbors are not harmed.

Most organizations require that the brickwork is in good condition, and not lead to precipitation. You should also treat any wet problems that were previously suitable for isolating spouwmuur.

How much does it cost for spouwmuur isolatie?
Spouwmuur isolatie (insulation of hollow walls) carries costs, but you can expect to pay around £ 700 to protect your order. The average size of the property is about 400 pounds sterling. Despite this, the defense can recover costs in about five years. Because you can save 275 pounds of gas and electricity per year.

Make sure that you select the organization you want to use intentionally. In an ideal world, they must be individuals of the National Alliance of Isolation (NIA), the Office for the Protection of Depression (CIGA) or the Agrément UK Leadership Group (BBA). You also need to make sure that SIGA provides long-term work.

Leave a Reply

Your email address will not be published. Required fields are marked *